dmesg - 2013-08-28 20:30
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfffd000 (usable)
[ 0.000000] BIOS-e820: 00000000dfffd000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] last_pfn = 0xdfffd max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fdad0] fdad0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfffd000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfffd000 page 4k
[ 0.000000] kernel direct mapping tables up to dfffd000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ dfff7000-dfffd000
[ 0.000000] RAMDISK: 364ea000 - 3726d000
[ 0.000000] ACPI: RSDP 00000000000fd920 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 00000000dfffd740 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 00000000dfffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 00000000dfffd9b0 02589 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 00000000dfffff40 00040
[ 0.000000] ACPI: SSDT 00000000dfffd8b0 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 00000000dfffd7c0 0007A (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 00000000dfffd780 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1cf9701, boot clock
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000dfffd
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048456
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3910 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 897085 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 129024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfffd000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000feffc000
[ 0.000000] PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
[ 0.000000] PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1effc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s83072 r8192 d23424 u1048576
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] kvm-clock: cpu 0, msr 1:1fc13701, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 11fc0ddc0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030019
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4032340k/4718592k available (6566k kernel code, 524768k absent, 161484k reserved, 6637k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Detected 2393.998 MHz processor.
[ 0.008000] Calibrating delay loop (skipped) preset value.. 4787.99 BogoMIPS (lpj=9575992)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] Security Framework initialized
[ 0.008000] AppArmor: AppArmor initialized
[ 0.008000] Yama: becoming mindful.
[ 0.008000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009655] Mount-cache hash table entries: 256
[ 0.009876] Initializing cgroup subsys cpuacct
[ 0.009883] Initializing cgroup subsys memory
[ 0.009891] Initializing cgroup subsys devices
[ 0.009895] Initializing cgroup subsys freezer
[ 0.009898] Initializing cgroup subsys blkio
[ 0.009912] Initializing cgroup subsys perf_event
[ 0.009998] mce: CPU supports 10 MCE banks
[ 0.016300] ACPI: Core revision 20110623
[ 0.017470] ftrace: allocating 27049 entries in 107 pages
[ 0.021440] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.021445] CPU0: Intel QEMU Virtual CPU version 1.0 stepping 03
[ 0.024001] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
[ 0.024001] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.024001] Booting Node 0, Processors #1 Ok.
[ 0.024001] smpboot cpu 1: start_ip = 96000
[ 0.036008] kvm-clock: cpu 1, msr 1:1fd13701, secondary cpu clock
[ 0.036047] KVM setup async PF for cpu 1
[ 0.036060] NMI watchdog disabled (cpu1): hardware events not enabled
[ 0.036047] kvm-stealtime: cpu 1, msr 11fd0ddc0
[ 0.036095] Brought up 2 CPUs
[ 0.036116] Total of 2 processors activated (9575.99 BogoMIPS).
[ 0.040415] devtmpfs: initialized
[ 0.040966] EVM: security.selinux
[ 0.040969] EVM: security.SMACK64
[ 0.040972] EVM: security.capability
[ 0.041129] print_constraints: dummy:
[ 0.041129] RTC time: 18:27:05, date: 08/28/13
[ 0.041129] NET: Registered protocol family 16
[ 0.041129] Trying to unpack rootfs image as initramfs...
[ 0.048238] ACPI: bus type pci registered
[ 0.048345] PCI: Using configuration type 1 for base access
[ 0.056582] bio: create slab at 0
[ 0.057004] ACPI: Added _OSI(Module Device)
[ 0.057009] ACPI: Added _OSI(Processor Device)
[ 0.057012] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.057015] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.057663] ACPI: EC: Look up EC in DSDT
[ 0.059484] ACPI: Interpreter enabled
[ 0.059491] ACPI: (supports S0 S3 S4 S5)
[ 0.059507] ACPI: Using IOAPIC for interrupt routing
[ 0.063460] ACPI: No dock devices found.
[ 0.063465] HEST: Table not found.
[ 0.063469] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.063490] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.063542] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.063544] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.063547] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.063549] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[ 0.063592] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.063879] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.072196] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[ 0.072640] pci 0000:00:01.1: reg 20: [io 0xc0e0-0xc0ef]
[ 0.072900] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[ 0.073326] pci 0000:00:01.2: reg 20: [io 0xc080-0xc09f]
[ 0.073657] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[ 0.074216] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.074231] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.074366] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[ 0.080053] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
[ 0.083020] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff]
[ 0.096736] pci 0000:00:02.0: reg 30: [mem 0xfebd0000-0xfebdffff pref]
[ 0.120112] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
[ 0.120314] pci 0000:00:03.0: reg 10: [io 0xc0a0-0xc0bf]
[ 0.120441] pci 0000:00:03.0: reg 14: [mem 0xfebf1000-0xfebf1fff]
[ 0.121050] pci 0000:00:03.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.121268] pci 0000:00:04.0: [1af4:1001] type 0 class 0x000100
[ 0.123808] pci 0000:00:04.0: reg 10: [io 0xc000-0xc03f]
[ 0.124915] pci 0000:00:04.0: reg 14: [mem 0xfebf2000-0xfebf2fff]
[ 0.152108] pci 0000:00:05.0: [1af4:1001] type 0 class 0x000100
[ 0.153845] pci 0000:00:05.0: reg 10: [io 0xc040-0xc07f]
[ 0.155686] pci 0000:00:05.0: reg 14: [mem 0xfebf3000-0xfebf3fff]
[ 0.172057] pci 0000:00:06.0: [1af4:1002] type 0 class 0x000500
[ 0.172166] pci 0000:00:06.0: reg 10: [io 0xc0c0-0xc0df]
[ 0.172893] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.173449] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.177788] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.177893] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.177972] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.178053] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.178134] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[ 0.188061] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.188069] vgaarb: loaded
[ 0.188074] vgaarb: bridge control possible 0000:00:02.0
[ 0.188256] i2c-core: driver [aat2870] using legacy suspend method
[ 0.188260] i2c-core: driver [aat2870] using legacy resume method
[ 0.188387] SCSI subsystem initialized
[ 0.188866] libata version 3.00 loaded.
[ 0.188958] usbcore: registered new interface driver usbfs
[ 0.188980] usbcore: registered new interface driver hub
[ 0.189107] usbcore: registered new device driver usb
[ 0.189447] PCI: Using ACPI for IRQ routing
[ 0.189455] PCI: pci_cache_line_size set to 64 bytes
[ 0.189646] reserve RAM buffer: 000000000009bc00 - 000000000009ffff
[ 0.189651] reserve RAM buffer: 00000000dfffd000 - 00000000dfffffff
[ 0.189845] NetLabel: Initializing
[ 0.189851] NetLabel: domain hash size = 128
[ 0.189853] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.189872] NetLabel: unlabeled traffic allowed by default
[ 0.190185] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.190211] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.190217] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.200366] Switching to clocksource kvm-clock
[ 0.211517] AppArmor: AppArmor Filesystem Enabled
[ 0.211547] pnp: PnP ACPI init
[ 0.211571] ACPI: bus type pnp registered
[ 0.211608] pnp 00:00: [bus 00-ff]
[ 0.211611] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.211613] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.211622] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.211625] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.211627] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[ 0.211682] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.211726] pnp 00:01: [io 0x0070-0x0071]
[ 0.211771] pnp 00:01: [irq 8]
[ 0.211773] pnp 00:01: [io 0x0072-0x0077]
[ 0.211809] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.211840] pnp 00:02: [io 0x0060]
[ 0.211842] pnp 00:02: [io 0x0064]
[ 0.211861] pnp 00:02: [irq 1]
[ 0.211888] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.211924] pnp 00:03: [irq 12]
[ 0.211961] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.211983] pnp 00:04: [io 0x03f2-0x03f5]
[ 0.211985] pnp 00:04: [io 0x03f7]
[ 0.212020] pnp 00:04: [irq 6]
[ 0.212023] pnp 00:04: [dma 2]
[ 0.212063] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.212149] pnp 00:05: [io 0x03f8-0x03ff]
[ 0.212167] pnp 00:05: [irq 4]
[ 0.212206] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.212283] pnp 00:06: [io 0x02f8-0x02ff]
[ 0.212303] pnp 00:06: [irq 3]
[ 0.212341] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.212388] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.212431] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.212567] pnp: PnP ACPI: found 8 devices
[ 0.212571] ACPI: ACPI bus type pnp unregistered
[ 0.237534] PCI: max bus depth: 0 pci_try_num: 1
[ 0.237546] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.237549] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff]
[ 0.237611] NET: Registered protocol family 2
[ 0.237774] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.239479] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.246471] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.247317] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.247324] TCP reno registered
[ 0.247337] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.247408] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.247558] NET: Registered protocol family 1
[ 0.247579] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.247612] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.247637] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.247794] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.247823] pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[ 0.247895] pci 0000:00:01.2: PCI INT D disabled
[ 0.247925] pci 0000:00:02.0: Boot video device
[ 0.247966] PCI: CLS 0 bytes, default 64
[ 0.247977] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.247983] Placing 64MB software IO TLB between ffff8800dbff7000 - ffff8800dfff7000
[ 0.247987] software IO TLB at phys 0xdbff7000 - 0xdfff7000
[ 0.248450] audit: initializing netlink socket (disabled)
[ 0.248466] type=2000 audit(1377714426.244:1): initialized
[ 0.298556] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.317627] VFS: Disk quotas dquot_6.5.2
[ 0.317696] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.318318] fuse init (API version 7.17)
[ 0.318431] msgmni has been set to 7875
[ 0.318956] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.319021] io scheduler noop registered
[ 0.319025] io scheduler deadline registered
[ 0.319068] io scheduler cfq registered (default)
[ 0.319188] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.319214] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.319322] efifb: probing for efifb
[ 0.319448] efifb: framebuffer at 0xfc000000, mapped to 0xffffc90001080000, using 1408k, total 1408k
[ 0.319453] efifb: mode is 800x600x24, linelength=2400, pages=1
[ 0.319456] efifb: scrolling: redraw
[ 0.319459] efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.321936] Console: switching to colour frame buffer device 100x37
[ 0.323827] fb0: EFI VGA frame buffer device
[ 0.323957] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.324032] ACPI: Power Button [PWRF]
[ 0.325129] ERST: Table is not found!
[ 0.325168] GHES: HEST is not enabled!
[ 0.325375] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.325438] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
[ 0.325524] virtio-pci 0000:00:03.0: setting latency timer to 64
[ 0.325665] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[ 0.325765] virtio-pci 0000:00:04.0: setting latency timer to 64
[ 0.327172] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.327213] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 0.327294] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 0.328576] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.328617] virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
[ 0.329758] virtio-pci 0000:00:06.0: setting latency timer to 64
[ 0.352364] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.393430] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.430172] Freeing initrd memory: 13836k freed
[ 0.561608] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.585404] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.586712] Linux agpgart interface v0.103
[ 0.589289] brd: module loaded
[ 0.591105] loop: module loaded
[ 0.592421] virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.592442] virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X
[ 0.698084] vda: vda1
[ 0.701106] virtio-pci 0000:00:05.0: irq 42 for MSI/MSI-X
[ 0.701127] virtio-pci 0000:00:05.0: irq 43 for MSI/MSI-X
[ 0.826619] vdb: unknown partition table
[ 0.829132] ata_piix 0000:00:01.1: version 2.13
[ 0.829239] ata_piix 0000:00:01.1: setting latency timer to 64
[ 0.829836] scsi0 : ata_piix
[ 0.831016] scsi1 : ata_piix
[ 0.831986] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14
[ 0.832991] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15
[ 0.834581] Fixed MDIO Bus: probed
[ 0.835547] tun: Universal TUN/TAP device driver, 1.6
[ 0.836500] tun: (C) 1999-2004 Max Krasnyansky
[ 0.837976] virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
[ 0.837996] virtio-pci 0000:00:03.0: irq 45 for MSI/MSI-X
[ 0.838013] virtio-pci 0000:00:03.0: irq 46 for MSI/MSI-X
[ 1.054185] PPP generic driver version 2.4.2
[ 1.055571] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.056571] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.057516] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.058484] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
[ 1.059468] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 1.059480] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 1.060640] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 1.061714] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
[ 1.063028] hub 1-0:1.0: USB hub found
[ 1.063942] hub 1-0:1.0: 2 ports detected
[ 1.064993] usbcore: registered new interface driver libusual
[ 1.065958] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.067577] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.068528] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.070058] mousedev: PS/2 mouse device common for all mice
[ 1.071490] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.072838] rtc_cmos 00:01: RTC can wake from S4
[ 1.074194] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.075198] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.076233] device-mapper: uevent: version 1.0.3
[ 1.077442] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 1.078377] cpuidle: using governor ladder
[ 1.079291] cpuidle: using governor menu
[ 1.080202] EFI Variables Facility v0.08 2004-May-17
[ 1.081349] TCP cubic registered
[ 1.082387] NET: Registered protocol family 10
[ 1.083983] NET: Registered protocol family 17
[ 1.084923] Registering the dns_resolver key type
[ 1.086491] PM: Hibernation image not present or could not be loaded.
[ 1.086509] registered taskstats version 1
[ 1.103094] Magic number: 9:951:494
[ 1.104257] rtc_cmos 00:01: setting system clock to 2013-08-28 18:27:06 UTC (1377714426)
[ 1.105288] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.106248] EDD information not available.
[ 1.108937] Freeing unused kernel memory: 920k freed
[ 1.110354] Write protecting the kernel read-only data: 12288k
[ 1.116282] Freeing unused kernel memory: 1608k freed
[ 1.121799] Freeing unused kernel memory: 1196k freed
[ 1.143290] udevd[86]: starting version 175
[ 1.248103] Refined TSC clocksource calibration: 2393.874 MHz.
[ 1.280583] FDC 0 is a S82078B
[ 1.322266] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.376120] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 2.835561] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.909888] udevd[321]: starting version 175
[ 3.030261] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[ 3.134484] lp: driver loaded but no devices found
[ 3.381134] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[ 3.388838] input: QEMU 1.0 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2
[ 3.388974] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 1.0 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 3.389014] usbcore: registered new interface driver usbhid
[ 3.389018] usbhid: USB HID core driver
[ 3.729833] type=1400 audit(1377714429.120:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=486 comm="apparmor_parser"
[ 3.730106] type=1400 audit(1377714429.120:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=486 comm="apparmor_parser"
[ 3.730256] type=1400 audit(1377714429.120:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=486 comm="apparmor_parser"
[ 3.731250] type=1400 audit(1377714429.120:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=477 comm="apparmor_parser"
[ 3.731620] type=1400 audit(1377714429.120:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=477 comm="apparmor_parser"
[ 3.732867] type=1400 audit(1377714429.124:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser"
[ 3.899678] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 5.112407] eth0: IPv6 duplicate address fe80::f816:3eff:fe25:cb09 detected!
[ 5.386871] init: failsafe main process (655) killed by TERM signal
[ 5.741031] type=1400 audit(1377714431.132:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=757 comm="apparmor_parser"
[ 5.746265] type=1400 audit(1377714431.136:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=757 comm="apparmor_parser"
[ 5.746418] type=1400 audit(1377714431.136:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=757 comm="apparmor_parser"
[ 5.749245] type=1400 audit(1377714431.140:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=761 comm="apparmor_parser"
[ 6.619932] init: plymouth-upstart-bridge main process (718) killed by TERM signal